This is a basic guide to what the GUI looks like, and how to write your first test. It assumes you have read and followed the instructions in the installation guide.

We will use a 'hello world' program as an example. Text in italics is background information only.

For each executable program to be tested, a 'TextTest application' needs to be created to tell it what to run. To do this for the first time, just run texttest.py, providing the --new option if there are already tests existing in the place you've designated as TEXTTEST_HOME (for example if it's pointing to the tests directory in the download)

A dialog will then come up where you can tell it about your application. You need to pick a full name for use in reports, and also a short file extension which will be used by TextTest for all files relevant to that application. It can be useful to select a subdirectory (if you write a non-existent name it will be created) to aid with organising tests for different applications in the future. Finally, of course, browse your file system and identify the executable program that will be tested (your hello world program).

You now have an application with no tests. You should see something like this. (I chose the extension "hello" here and the rather cryptic HELLO as full name)

This is the static, or test management GUI. On the left you see a tree view of all tests and test suites that there are. The single line shown is the 'root test suite for the application', created by default, currently containing no tests.

On the right, we have a couple of tabs. The one shown has various options for selecting tests: not very useful when we don't have any. The other “Config” will allow us to view and edit the config file we just created.

To create a test, we first select the root test suite where we wish to add it, by single-clicking that line on the left. This brings up a “Test” tab on the right, which in turn shows us the files contained in the viewed test/suite (currently suite). There is just one, “testsuite.hello”, which defines which tests are contained in the suite. We can then bring up the popup menu by right clicking the same line, and select "Add Test", which brings up a dialog for adding a new test. We enter a test name and a brief description of what the test is for, and click the 'OK' button at the bottom. This creates a test and automatically views it:

We now have an 'empty test' under the root test suite (called 'Basic' above). As can be seen, there are no 'standard files' yet, because we have not yet said what the test should produce. We could create these files by hand, but the easiest way is to run the test and see what happens.

We click the “Run” button on the toolbar to run the selected tests. This starts the dynamic GUI in a new window, which performs test runs. The test fails, because no standard results are yet defined. On the left we see a tree view similar to the one above, on the right a summary of which files are different in the test.

It collected the standard error and standard output of the process into 'errors.hello' and 'output.hello' files. These can be viewed by double-clicking in the file view, or a summary is available in the 'Text Info' window. We can see that the text 'Hello world' appeared on standard output, while nothing was written to standard error. We like this behaviour, so we click 'Save' on the toolbar.

Now the test goes green and the produced files are saved as the standard versions. By default, TextTest assumes that succeeded and saved tests are not interesting and hence collapses the suite containing it and removes the Test tab again, returning to the selection view we had before. We can now exit the dynamic GUI, pressing 'Quit'. When we look in the static GUI, which has been there all along, we now see this.

The files produced by the dynamic GUI run have been saved as 'Standard Files' and will now be used as comparison in the next test run (which we would expect to go green immediately).

So there it is: your first working, repeatable test for “hello world”. Now for testing a real program: what do I still need to know?

One of the most immediate challenges is often that real programs write output that changes from run to run, such as temporary file names, process IDs, times etc. TextTest allows you to define what such statements looks like in your program so that it can filter them out, avoiding false failures when only such information changes. To see how to do this, look at the section on run-dependent text.

Another challenge is that you may well need to provide test data to your application, which may also be changed by the tests. As we saw above, TextTest creates a specific temporary directory for each test run, and its model is that all needed data files are provided there and the application is configured so that it only writes files there. This directory is known as the TextTest sandbox. One very common usage of this mechanism is to configure your application's logging for the tests, by providing log4x-style configuration files as test data : this is documented as an example on the same page.

It's also the case that real programs often read and write files other than standard error and output. You may want also want TextTest to keep track of this, and maybe also to compare them in the same way as you do for standard output and error. See the section on collating files for details.

At this point you should be able to get going with building a test suite for your application. There is of course more to TextTest than this, other features are linked from the table provided above.